Kwick Fix Solutions
Kwick Fix Solutions
Bhuleshwar, Mumbai, Maharashtra

Waterproofing Chemicals

Offering you a complete choice of products which include dr. fixit pidifin 2k, dr. fixit powder waterproof and dr fixit lw.

Dr. Fixit Pidifin 2K

Dr. Fixit Pidifin 2K
  • Dr. Fixit Pidifin 2K
  • Dr. Fixit Pidifin 2K
  • Dr. Fixit Pidifin 2K
Get Best Quote
Approx. Price: Rs 1,600 / SetGet Latest Price

Product Details:

Minimum Order Quantity1 Set
Packaging Size3-15kg
NatureTwo Component
Abrasion Resistance0.09cm/km
Appearance of MicFree flowing slurry

Dr. Fixit Pidifin 2K is a two component cementitious & acrylic flexible waterproofing & protective coating composed of best quality portaland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and similar structures. specially formulated for swimming pools, retaining walls, pile Heads, water tanks, submerged tunnels, sumps, bridge decks, marbles, granites and a wide variety of extreme service class structures because on curing it forms an excellent elastomeric, waterproof & protective layer over the substrate.

Areas of Application:
Dr. fixit Pidifin 2K can be applied to new or old concrete structures that are structurally sound and strong:
  • Basement retaining walls.
  • Pile Heads.
  • Structural surfaces of cellars.
  • Concrete roof slabs, floors, balcony floor slabs.
  • Water tanks and swimming pools.
  • Bridge decks.
  • Canals and dam walls.
  • Structural surfaces of dykes.
  • Waterproof coating (bottom coat) for marble, granite and other natural stones.
  • Suitable for steam room waterproofing.
  • Sewage treatment plants.
  • for special applications such as areas where more thick plaster application is needed

Features & Benefits:
  • Flexibility: Provides a flexible & low permeable coating.
  • Water permeability: Excellent resistance to ingress of water.
  • Slip resistant: Provides slip resistant coating.
  • Waterproof: Waterproof for concrete structures.
  • Adhesion: Excellent adhesion to concrete, natural and artificial stone.
  • Diffusion: Excellent resistance to chloride ion diffusion and carbon dioxide.
  • Low temperature resistant: Resistance to freeze-thaw cycles and de-icing salts.
  • Carbonation: Prevents carbonation of cement concrete.

Method of Application:Surface Preparation:
  • The surface must be strong & free from dirt, dust & loose particles.Thoroughly wire brush the surface &clean the dust by air compressor or wash the surface with water.
  • Oil & grease must be removed using degreasing solvents.
  • Any damaged surface must be repaired by using polymer modified repair mortar.

  • Shake well the liquid component to a homogenous milky colour , before mixing transfer entire quantity of liquid component into a suitable clean mixing vessel, gradually start addition of powder component under constant mixing with a stirrer using a pneumatic or electric power tool (1kw) at slow speed at 250 – 300 rpm for 3- 5 minutes to a homogeneous & uniform free flowing slurry.

  • Blinding Coverage:Apply slurry coat of mixed material for two coats at a coverage rate of 1.5 kg/m2 over the set concrete slab by a masonry brush or appropriate power spray equipment.
  • Concrete slabs or roof slabs: Two coat of mixed slurry to be applied to the set concrete @ 1.5 - 2kg/m2 by a masonry brush, roller or appropriate power spray equipment.
  • Pile Heads: Two coats of mixed slurry to be applied on to the pile head @ 0.75kg/m2 first coat and 1.25 to 1.5 kg/m2.second coat either by a masonry brush or by appropriate power spray equipment.
  • Water tanks and Swimming pools: Two coat of Dr. fixit pidifin 2k applied @ 1.5 kg/m2 each coat by a masonry brush or an appropriate power spray equipment.All applications where two coats is specified,
  • the second coat shall be applied when the first coat is completely dried.The treated area should be protected from direct sunlight and to be damp cured by covering with damp hessian or similar system.
Yes! I am interested
View PDF

Dr. Fixit Powder Waterproof

Dr. Fixit Powder Waterproof
  • Dr. Fixit Powder Waterproof
Get Best Quote
Approx. Price: Rs 28 / PieceGet Latest Price

Product Details:

Minimum Order Quantity20 Piece
BrandDr Fixit
Packaging TypeBag
AppearanceFree flowing powder
ColourOff white

Dr. Fixit Powder Waterproof is composed of waterproofing additives, dispersed in inert fine filler. It is an integral powder-waterproofing admixture used for waterproofing of concrete and cement plasters, because It makesconcrete cohesive & reduces porosity & improve water tightness.

Standard compliances / Specification:
  • Meets the requirements of IS : 2645 – 75 standard.

Areas of Application:
  • Basements
  • Roof slabs and screeds
  • Water retaining structures
  • External plastering
  • Bathrooms
  • Balconies

Features & Benefits:

  • Corrosion: Chloride-free hence no chances of corrosion of reinforcement bars.
  • Water seepage: As an effective pore filler, helps to fill capillaries and pores to prevent water seepage.
  • Consistency: Makes the mix cohesive and denser, hence the concrete & plaster has reduced permeability .
  • Economics: Most economical water proofing additive, reduces water absorption.
  • Setting & strength: Does not affect the setting time and strength. Of the cured concrete.
  • Compatibility: Compatible with all types & grades of cements.


Method of Application:

Hand Mixing:

  • Add Dr. Fixit Powder Waterproof to the dry mix of cement sand and mix evenly with a spade, until an even mix is obtained.
  • Add the measured quantity of potable water as per decided W/C ratio and mix to a homogeneous & uniform consistency concrete / mortars.
  • Place the mixed concrete / mortar into shuttering, provided
  • Cure the concrete / mortar surface as per regular practices of water curing.

Machine Mixing:

  • Charge the Cement & sand as per the mix design into concrete mixer & mix for one minute. Add 500 g of Dr. Fixit Powder Waterproof for every 50 kg bag of cement. & mix for one minute.
  • Add the measured quantity of potable water as per W/C ratio and mix for 2-3 minutes to a lumps free homogeneous concrete.
  • Place the mixed concrete mortar into shuttering provided.
  • Cure the concrete / mortar surface as per regular practices of water curing.

Precautions & Limitations:

  • Do not add Dr. Fixit Powder Waterproof directly to water.
  • Do not add Dr Fixit Powder Waterproof in wet concrete/ mortar.


Shelf Life & Storage:

  • Shelf life is 12 months from date of manufacturing in unopened containers.
  • Store at cool & dry place, away from sun heat & fire.


Health & Safety Precautions:

  • Use rubber hand gloves & safety goggles, while using Dr Fixit Powder Waterproof.
  • In case of contact with skin, wash with plenty of water.
  • Keep out of reach of children’s .
      Yes! I am interested
      View PDF

      Dr Fixit LW

      Dr Fixit LW
      • Dr Fixit LW
      Get Best Quote
      Approx. Price: Rs 550 / PieceGet Latest Price

      Product Details:

      Minimum Order Quantity1 Piece
      Physical StateLiquid
      BrandDr Fixit
      Packaging Size5L

      Unique cement additive for plaster / concrete for integral waterproofing.

      Features and Benefits:

      • Waterproofs by filling pores and cutting capillaries
      • Good workability
      • Increases cohesive strength of the mix
      • Delays corrosion
      • Prevents cracking in plaster

      Present Scenario of Concrete & Masonry Structures:

      • Primary Waterproofing is always provided by an elastic
        coating/membrane. However, the general resistance to
        water penetration and the resultant improved durability
        of structures is often ignored but can be achieved
        through Secondary Waterproofing.
      • More than 85% of the concrete produced in India is
        still made by volume batching. There is lack of control
        of W/C ratio at sites. The control on quality of sand
        and aggregate is very limited. The concrete usually
        has high permeability.
      • In the foundation concrete there is ingress of salts
        and water. This causes deterioration of concrete and
        also the ground water rises in the walls through the
        capillaries in mortar and bricks. This leads to persistent
        rising dampness and peeling-of paints in walls at the
        ground level.
      • The pollutants like CO 2 etc. along with water enter into
        the concrete above ground leading to rebar corrosion
        and deterioration of concrete.
      • Site-mixed mortar and plaster are commonly in
        use, unlike pre-mix mortars used in other countries.
        The site-mixed mortars lack adhesion and cohesive
        properties compared to the international practice.
        Ultimately, cracks appear in mortar and plaster
      • All in all, cracks and dampness in concrete & masonry
        structures bring down their actual life from the
        designed level.


      Dr. Fixit Pidiproof LW+: Dr. Fixit Pidiproof LW+ is a unique cement additive having judicious combination of various selective polymers which work in different manner to give
      different properties such as:

      • Increase in compressive strength
      • Corrosion resistance
      • Micro structure refinement which reduces permeability.
      • Improved dispersion mechanism leading to water reduction of 6-8%
      Yes! I am interested
      View PDF

      Explore more products

      Rust X 90
      Rust X 90
      Get Best Quote
      Dr. Fixit Raincoat
      Dr. Fixit Raincoat
      Get Best Quote
      Sunanda Polyalk WP
      Sunanda Polyalk WP
      Get Best Quote
      Sunanda Rusticide
      Sunanda Rusticide
      Get Best Quote

      Reach Us
      Yusuf Mansur Lokhandwala (Proprietor)
      No. 17, C. P. Tank Road, Near Gulalwadi Circle Next To Hakimji House
      Bhuleshwar, Mumbai- 400004, Maharashtra, India

      Call Us

      Share Us

      F GT L

      Send E-mailSend SMS