FLASHBAND SELF ADHESIVE TAPE

Product Details:

KWICKSEAL AT:

MULTI-PURPOSE, DO-IT-YOURSELF

SELF ADHESIVE BITUMEN SEALING TAPE

1. Description:

·         KWICKSEAL AT is cold-applied, flexible, rubberized bitumen based sealing tape.

·         It is a two layered 1.5mm polymer bitumen waterproofing layer with an aluminum foil to protect the material from impacts of UV radiation and to protect the adhesion of sealed elements.

·         The bottom side of KWICKSEAL AT is covered with an easily removable protective film.

·         KWICKSEAL AT is a convenient way to seal various cracks and joints.

·         It can also be used to insulate junctions for roofing repairs.

·         KWICKSEAL AT is specially designed for sealing substrates like metals, concrete, wood, glass, plastic (TPO, PP, PE) and bitumen.    

2. Packing and Size:

·        KWICKSEAL AT comes in width of 50mm.
The length of 10mtr is standard for all variants.
Thickness of 1.5mm is standard for all variants.
Packing is available in aluminum coated rolls.

3.Product Advantages:

·         Waterproof: Excellent adhesion and instantly watertight. 
Flexible: Excellent cold flexibility up to -25°C and maximum 100°C.
 Heat Resistant: Can be exposed to elements indefinitely. Versatile flashing around exterior protrusions.
 Cold applied: Eliminates fire hazard during application.
Do-it-yourself: Installs easily without any tar, torches, mops, glues or fasteners.
Saves time, material, labour and utility costs.
 Multipurpose and multi-surface application.

 4.Applications:

·        Rooftops,Drained Systems,Ventilation Junction,Cold  Pipes,Green Houses, Facades,Joints and corners,Building Cracks,Storage Tanks,Pre-Engineered Building Structures

5.Surface Preparation:

·       Surface should be cleaned of any dust, oil, loose particles and water. Application temperature should be above 5°C and below 80°C. Application should not be done on wet surfaces. The surface must be completely dry and clean for enduring results.

6.Product Applications:

·         Measure and cut KWICKSEAL AT to required length.
  For better sealing KWICKSEAL AT should overlap the hole or gap for 3-5cm from each side depending on the damage.

·       Remove the protective film.

·       Gently position KWICKSEAL AT to the surface and press it with a roller or hand.

·        Expel any air, especially on overlaps and at edges.

·        Installation on Cylindrical surfaces:  To repair damage on pipes, the tape is wound spirally (with an overlap on the previous turn).

Product Details:

KWICKSEAL BT:

MULTI-PURPOSE, DO-IT-YOURSELF

SELF ADHESIVE BUTYL RUBBER SEALING TAPE

1. Description:

·         KWICKSEAL BT is cold-applied, flexible, synthetic rubber sealing tape made from premium butyl rubber.

·         It is a two layered 1.5mm premium butyl rubber waterproofing layer with an aluminum foil to protect the material from impacts of UV radiation and to protect the adhesion of sealed elements.

·         The bottom side of KWICKSEAL BT is covered with an easily removable protective film.

·         KWICKSEAL BT is a convenient way to seal various cracks and joints.

·         It can also be used to insulate junctions for roofing repairs and HVAC.

·         KWICKSEAL BT is specially designed for sealing substrates like metals, concrete, wood, glass and plastic (TPO, PP, PE).   

2. Packing and Size:

·         Packing is available in aluminum coated rolls of 100mm (width) X 10mtr (length) X 1.5mm (thickness)

3. Product Advantages:

·         Waterproof: Excellent adhesion and instantly watertight.

·         Toxic free and safe for portable water.

·         Flexible: Excellent cold flexibility up to -45°C and maximum 100°C.

·         Heat Resistant: Can be exposed to elements indefinitely. Versatile flashing around exterior protrusions.

·         Cold applied: Eliminates fire hazard during application.

·         Do-it-yourself: Installs easily without any tar, torches, mops, glues or fasteners.

·         Saves time, material, labour and utility costs.

·         Multipurpose and multi-surface application.

4.  Applications:

·         HVAC pipes and chambers

·         Automobile rooftops

·         Roofing, cladding and glazing Joints

·         Pipe sealing tape

·         Water Tanks

Product Details:

KWICKSEAL AT:

MULTI-PURPOSE, DO-IT-YOURSELF

SELF ADHESIVE BITUMEN SEALING TAPE

1. Description:

·         KWICKSEAL AT is cold-applied, flexible, rubberized bitumen based sealing tape.

·         It is a two layered 1.5mm polymer bitumen waterproofing layer with an aluminum foil to protect the material from impacts of UV radiation and to protect the adhesion of sealed elements.

·         The bottom side of KWICKSEAL AT is covered with an easily removable protective film.

·         KWICKSEAL AT is a convenient way to seal various cracks and joints.

·         It can also be used to insulate junctions for roofing repairs.

·         KWICKSEAL AT is specially designed for sealing substrates like metals, concrete, wood, glass, plastic (TPO, PP, PE) and bitumen.    

2. Packing and Size:

·        KWICKSEAL AT comes in width of 150mm.
The length of 10mtr is standard for all variants.
Thickness of 1.5mm is standard for all variants.
Packing is available in aluminum coated rolls.

3.Product Advantages:

·         Waterproof: Excellent adhesion and instantly watertight. 
Flexible: Excellent cold flexibility up to -25°C and maximum 100°C.
 Heat Resistant: Can be exposed to elements indefinitely. Versatile flashing around exterior protrusions.
 Cold applied: Eliminates fire hazard during application.
Do-it-yourself: Installs easily without any tar, torches, mops, glues or fasteners.
Saves time, material, labour and utility costs.
 Multipurpose and multi-surface application.

 4.Applications:

·        Rooftops,Drained Systems,Ventilation Junction,Cold  Pipes,Green Houses, Facades,Joints and corners,Building Cracks,Storage Tanks,Pre-Engineered Building Structures

5.Surface Preparation:

·       Surface should be cleaned of any dust, oil, loose particles and water. Application temperature should be above 5°C and below 80°C. Application should not be done on wet surfaces. The surface must be completely dry and clean for enduring results.

6.Product Applications:

·         Measure and cut KWICKSEAL AT to required length.
  For better sealing KWICKSEAL AT should overlap the hole or gap for 3-5cm from each side depending on the damage.

·       Remove the protective film.

·       Gently position KWICKSEAL AT to the surface and press it with a roller or hand.

·        Expel any air, especially on overlaps and at edges.

·        Installation on Cylindrical surfaces:  To repair damage on pipes, the tape is wound spirally (with an overlap on the previous turn).

Product Details:

KWICKSEAL AT:

MULTI-PURPOSE, DO-IT-YOURSELF

SELF ADHESIVE BITUMEN SEALING TAPE

1. Description:

·         KWICKSEAL AT is cold-applied, flexible, rubberized bitumen based sealing tape.

·         It is a two layered 1.5mm polymer bitumen waterproofing layer with an aluminum foil to protect the material from impacts of UV radiation and to protect the adhesion of sealed elements.

·         The bottom side of KWICKSEAL AT is covered with an easily removable protective film.

·         KWICKSEAL AT is a convenient way to seal various cracks and joints.

·         It can also be used to insulate junctions for roofing repairs.

·         KWICKSEAL AT is specially designed for sealing substrates like metals, concrete, wood, glass, plastic (TPO, PP, PE) and bitumen.    

2. Packing and Size:

·        KWICKSEAL AT comes in width of 100mm.
The length of 10mtr is standard for all variants.
Thickness of 1.5mm is standard for all variants.
Packing is available in aluminum coated rolls.

3.Product Advantages:

·         Waterproof: Excellent adhesion and instantly watertight. 
Flexible: Excellent cold flexibility up to -25°C and maximum 100°C.
 Heat Resistant: Can be exposed to elements indefinitely. Versatile flashing around exterior protrusions.
 Cold applied: Eliminates fire hazard during application.
Do-it-yourself: Installs easily without any tar, torches, mops, glues or fasteners.
Saves time, material, labour and utility costs.
 Multipurpose and multi-surface application.

 4.Applications:

·        Rooftops,Drained Systems,Ventilation Junction,Cold  Pipes,Green Houses, Facades,Joints and corners,Building Cracks,Storage Tanks,Pre-Engineered Building Structures

5.Surface Preparation:

·       Surface should be cleaned of any dust, oil, loose particles and water. Application temperature should be above 5°C and below 80°C. Application should not be done on wet surfaces. The surface must be completely dry and clean for enduring results.

6.Product Applications:

·         Measure and cut KWICKSEAL AT to required length.
  For better sealing KWICKSEAL AT should overlap the hole or gap for 3-5cm from each side depending on the damage.

·       Remove the protective film.

·       Gently position KWICKSEAL AT to the surface and press it with a roller or hand.

·        Expel any air, especially on overlaps and at edges.

·        Installation on Cylindrical surfaces:  To repair damage on pipes, the tape is wound spirally (with an overlap on the previous turn).