This type of membrane is manufactured by modifying premium grade asphalts with atactic poly propylene and specially reinforced with non- woven polyester and slate mineral finish. This type of membrane show excellent strength, elasticity and durability.
It is used as waterproofing /dam proofing membrane for protection of various substrates in wide range of applications.
Medium to large roof slabs ( domestic, commercial and industrial)
Basements and raft slabs
Underground car parks ,bridges & underpass etc.
Storage Conditions / Shelf-Life:
Rolls must be stored in their original package, in vertical position and under cool and dry conditions. They must be protected from direct sunlight, rain, snow and ice, etc. The shelf life is 12 months if stored as per recommendations.
Concrete, mortar surfaces must be clean, free from grease, oil, and loosely adhering particles. Steel and iron surfaces must be free from scale, rust, grease and oil.
Application Method / Tools:
Application procedure may vary slightly depending upon site conditions. However given below are general guidelines. Apply bituminous primer to a clean, smooth and dry surface by brush, roller or spray. Unroll and align and re roll correctly before torching. Overlaps should be minimum 100mm.Use gas burner to heat the substrate and thermo fusible film on the underside on lower face of membrane. When the thermo- fusible film melts after torching, the membrane is ready to stick. Roll forward and press firmly against the substrate to bond. Heat both the overlaps and use the round tipped trowel heating the same to smoothen and press into seam. All angles and abutments should be sealed with extra care to ensure full bondage. The edges should be sealed well into the grooves.
All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
Health and Safety Information:
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data.
The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika’s recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product’s suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Asian Paints SmartCare Waterproofing Membrane is a APP modified polyester reinforced bituminous membrane for superior waterproofing. This membrane exhibits excellent tensile strength, tear strength, puncture resistance and dimensional stability. The torch side of the membrane is covered with polyethylene film for protection of the membrane.Waterproofing /damproofing membrane in horizontal and vertical applications for protection of various substrates like concrete, masonry, GI, aluminium, wood etc. in wide range of uses: > > > > > > Accessible and non accessible medium to large roof slabs in domestic, commercial and industrial construction.( As per specified system for accessibility) Basements and raft slabs Swimming Pools Roof Gardens Underground car parks Bridges & Tunnels
Multi Purpose Waterproofing membrane. KWICKFELT PP is a flexible , non-toxic, multiple ply waterproofing membrane based on a combination of selected synthetic polymer raw materials.
The core membrane is protected with PP non-woven geo-textile on both sides. This increases strength and combines perfectly with cement slurry and tile adhesives to make it an ideal choice for multipurpose waterproofing application.
KWICKFELT PP can be used as a waterproof and damp-proof layer for internal as well as external structures.
KWICKFELT PP is developed for waterproofing of floors and walls.
Basement & Foundations
Small SWimming Pools
Slopped Concrete Rooftops
Cement Fiber Board Panels/Dry Walls
Small & Medium Terraces
Packaging Details: 1.2 meter (width) X 100 meter (length)